DT-324D: IP receiver to ASI-TS output

DT-324D: IP receiver to ASI-TS output

IP packet converter to ASI-TS.

The DT-324 is a IP packet converter to ASI-TS. It extracts information from an Ethernet network and processes and delivers it up to 4 TS-ASI outputs.

The 100/1000 Mbps input must be connected to an IP network carrying MPEG-2 transport stream packets. The module extracts the IP streams from four Transport Streams corresponding to four DVB-ASI outputs available.

It is configured and controlled by means of the control module DT-800.

IP INPUT Ethernet 100/1000 Mbps. RJ45 connector.
TS OUTPUT 4 x DVB-ASI. BNC Female connector, 75 Ω
Communication protocol UDP or RTP/UDP communication protocol.
Transmision methode MULTICAST / IGMP Version 2.
Payload From 1 to 7 packets MPEG-2.
CONFIGURATION AND POWER SUPPLY Through the DT-800 Control Module in local (keypad) or remote mode (PC)

Iscriviti alla nostra e-News

Offerte speciali, promozioni e informazioni solo per voi.