MO-280: SFN/MFN DTMB modulator

MO-280: SFN/MFN DTMB modulator

Professional SFN/MFN DTMB modulator. Two ASI MPEG-2 TS inputs, one 10 MHz GPS reference input and one 1pps GPS reference input. Includes two test modes.


The MO-280 is a professional SFN/MFN DTMB modulator fully compliant with the GB20600-2006 and the GY/T 229. 1-2008 standards contained in a 19” 1U chassis. The unit has two serial ASI MPEG-2 TS inputs, one 10 MHz GPS reference input and one 1pps GPS reference input. The GPS inputs are used in combination with the Second Frame Initialization Packet (SIP) embedded in the transport streams for SFN synchronisation purposes.

In MFN mode, the MO-280 is able to work with any incoming bit rate as long as the net bit rate resulting from dropping all NULL packets present in the stream is strictly lower than the value given in the DTMB specification for the modulation parameters in use.

Two test modes are available in the MO-280 DTMB modulator, single tone output and test TS generation.

MPEG-2 TS INPUTS
  • 2xSerial ASI-TS MPEG-2 inputs
  • TS packets of length 188 or 204 bytes (automatic detection)
SYNCHRONISATION (GPS)
Inputs 10 MHz input and 1 pps input
Outputs 10 MHz output
OUTPUTS
IF Output 31 to 26 MHz (1 Hz steps). MER > 43 dB
RF Output 45 to 875 MHz (1 Hz steps). MER > 38 dB
DTMB PARAMETERS
Carrier mode Single, Multicarrier
Frame header length 420, 595, 945 symbols
Frame header phase Fixed, Rotating
FEC rates 0.4, 0.6, 0.8
Constellations 4QAM-NR, 4QAM, 16QAM, 32QAM, 64QAM
Time interleaving 240, 720
MFN operation Available
TESTS MODES
  • Generate to single carrier at the channel central frequency whose level equals the average DTMB output power.
  • Internal generation of test TS using PRBS sequences (length 15 / 23 embedded within NULL packets)

Iscriviti alla nostra e-News

Offerte speciali, promozioni e informazioni solo per voi.